First of all, it is necessary to comprehensively analyze the soil pressure resistance and water level of the device address. It is necessary to meet the application requirements of the device of the polishing machine to determine the device scheme. When the device of the polishing machine is installed, the ground will be cleaned as far as possible to prevent the polishing machine from being easy to clean. The device should prevent high-voltage transmission lines to prevent interference to the polishing machine.
An independent power supply is required to prevent sharing with other high-power electrical appliances. Polishing machine device needs relatively spacious installation site, it is very important to meet the operating space. Rainy, wet, salt and alkali area device polishing machine can not be installed on the ordinary mud ground, otherwise the need to consider many problems such as ventilation and drainage.
The polishing machine shall not be installed on the tuyere, otherwise the polishing machine can not operate well when the wind blows. Before connecting and energizing the polishing machine, it must be safely grounded. The outside of the machine shall not be used without grounding to ensure safety. The distribution box of polishing machine is equipped with an emergency stop button, which can make the machine stop working immediately when necessary.
Before starting, check whether the polishing wheel is reliable. The power supply must be blocked when installing or replacing the polishing wheel. When installing polishing wheel and impeller, see whether the Angle of the sheet is upward. Before starting the polishing wheel rotation direction must be consistent with the safety cover arrow direction. The workpiece must be placed in the workpiece slot, close to the polishing wheel will automatically rotate, forward polishing.
